This guide collects what 13 common home projects cost in Florida in 2026, with the source for every range. Most figures come from Angi's 2026 Tampa cost pages. Where the 2025 Cost vs Value Report has a matching project, we show its Miami and Jacksonville prices, and we use Homewyse's calculator for ZIPs in Miami, Jacksonville, Orlando and Tampa as a check. Permit fees come from county and city schedules.
Each trade below links to a full page with job-by-job tables, permit fees and ways to save.
Costs by trade
| Trade | Typical Florida range | Source | Full guide |
|---|---|---|---|
| Roofing | $7,568โ$24,216 for an asphalt shingle roof (Tampa) | Angi, 2026 | Roofing costs |
| Siding | $3,489โ$11,486 vinyl; $3,451โ$9,116 fiber cement (Tampa) | Angi, 2026 | Siding and stucco costs |
| Windows & doors | $4,720โ$13,960 per window project; $489โ$2,843 per door (Tampa) | Angi, 2026 | Window and door prices |
| HVAC | $4,100โ$7,003 AC replacement; $4,093โ$6,368 heat pump (Tampa) | Angi, 2026 | HVAC costs |
| Plumbing | $176โ$473 per typical job (Tampa) | Angi, 2026 | Plumbing costs |
| Electrical | $1,211โ$2,018 panel upgrade (Tampa) | Angi, 2026 | Electrical costs |
| Kitchen & bath remodeling | $5,352โ$13,631 bathroom; $14,700โ$40,900 kitchen (Tampa) | Angi, 2026 | Remodeling costs |
| Painting | $1,867โ$3,411 exterior; $926โ$2,664 interior (Tampa) | Angi, 2026 | Painting costs |
| Concrete | $2,724โ$14,631 driveway; $4โ$8 per sq ft slab (Tampa) | Angi, 2026 | Concrete costs |
| Fencing | $1,619โ$4,215 wood; $2,206โ$5,188 vinyl (Tampa) | Angi, 2026 | Fence costs |
| Landscaping | $1,057โ$4,392 per project (Tampa) | Angi, 2026 | Landscaping costs |
| Pest control | $89โ$260 per visit; $152โ$1,123 termite treatment (Tampa) | Angi, 2026 | Pest control costs |
| Gutter cleaning | $105โ$199 per visit (Tampa) | Angi, 2026 | Gutter costs |
Sources: Angi Tampa cost guides updated between October 2025 and September 2026, accessed November 2026. Each trade page lists the exact article and update date.
Larger projects: Cost vs Value 2025, Miami and Jacksonville
The Cost vs Value Report prices the same defined projects in each city, so it is useful for comparing scope. Florida cities in the 2025 report include Miami, Jacksonville, Fort Myers, Pensacola, Port St. Lucie, Sarasota and Tallahassee.
| Project | Miami | Jacksonville | South Atlantic | National |
|---|---|---|---|---|
| Minor kitchen remodel, midrange | $29,424 | $29,002 | $28,567 | $28,458 |
| Major kitchen remodel, midrange | $83,468 | $82,596 | $81,076 | $82,793 |
| Bath remodel, midrange | $25,565 | $24,594 | $25,609 | $26,138 |
| Roof replacement, asphalt (3,000 sq ft) | $39,729 | $33,356 | $32,253 | $31,871 |
| Roof replacement, metal | $64,142 | $50,900 | $50,181 | $51,865 |
| Siding replacement, fiber cement (1,250 sq ft) | $17,393 | $18,056 | $19,628 | $21,485 |
| Window replacement, vinyl (ten 3 x 5 ft) | $22,056 | $20,903 | $21,629 | $22,073 |
| Entry door replacement, steel | $2,466 | $2,391 | $2,398 | $2,435 |
| Garage door replacement | $5,821 | $5,379 | $5,126 | $4,672 |
| Furnace to heat pump conversion | $19,532 | $18,955 | $19,208 | $19,484 |
| Backup power generator | $13,580 | $14,128 | $13,561 | $13,534 |
Source: JLC Cost vs Value Report 2025, Miami and Jacksonville, Florida, accessed November 2026.
Roofing is where Miami stands out: its asphalt roof came in about 25% above the national figure and its metal roof about 24% above. Siding came in below the national figure in both cities. These are complete contractor jobs at a fixed size, so they often run above Angi's Tampa ranges, which include smaller jobs.
What makes Florida prices different
Trade wages. The table compares Florida and national mean hourly wages for the workers on each type of job. It shows what workers earn, not what contractors bill, so use it to judge how far a national guide may be off, not as a multiplier.
| Occupation | Florida mean hourly wage | U.S. mean hourly wage | Florida vs U.S. |
|---|---|---|---|
| Plumbers, pipefitters and steamfitters | $26.94 | $34.70 | -22% |
| Carpenters | $25.27 | $31.55 | -20% |
| Electricians | $27.72 | $34.37 | -19% |
| Glaziers | $23.32 | $28.71 | -19% |
| Roofers | $23.49 | $27.95 | -16% |
| Painters, construction and maintenance | $23.29 | $26.64 | -13% |
| Cement masons and concrete finishers | $25.26 | $28.87 | -13% |
| HVAC mechanics and installers | $27.55 | $31.14 | -12% |
| Fence erectors | $21.99 | $24.29 | -9% |
| Landscaping and groundskeeping workers | $18.80 | $20.33 | -8% |
| Pest control workers | $22.15 | $22.31 | -1% |
Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 estimates, retrieved through the BLS public data API, accessed November 2026.
Sales tax. Florida's state sales tax is 6%, and counties may add a discretionary surtax, per the Florida Department of Revenue. Under Rule 12A-1.051(4), contractors on real property jobs are the ultimate consumers of the materials they use and pay tax when they buy them, unless the contract is a retail sale plus installation. On a typical lump-sum bid the tax is part of the price, not a separate line.
Permit fees. Each city and county sets its own. A few examples for a single-family home:
| Permit | Hillsborough County (unincorp.) | City of Tampa | Orange County (unincorp.) | Miami-Dade County (unincorp.) |
|---|---|---|---|---|
| Re-roof | $250 | $177 | $27 + $5 per $1,000 of value | $0.113 per sq ft ($0.144 tile) |
| AC change-out | $130 | $120 | $39 | $133.38 |
| Window and door replacement, same size | $130 | $120 | n/a | $133.38 |
| Water heater | $130 (general plumbing) | $120 (general plumbing) | $39 | $133.38 (over 50 gal) |
Sources: Hillsborough County Building Permit Fee Schedule (effective Oct. 5, 2024); City of Tampa Trade Permit Fee Schedule (updated Feb. 16, 2023); Orange County Fee Directory FY 2026โ27; Miami-Dade Implementing Order 4-63 (effective Oct. 1, 2026). Accessed November 2026.
Tampa and Orange County add a state surcharge of 2.5% of the permit fee, with a $4 minimum. Miami-Dade's change-out fees are from its residential hardening pilot permit, which adds a $25.65 up-front fee.
Wind code and insurance. Florida's building code sets wind requirements that touch roofs, windows and doors. Section 627.0629 requires insurers' residential rate filings to include discounts or credits for wind-mitigation features such as roof deck attachment, roof-to-wall connections and opening protection; the statute does not set amounts, so ask your insurer before you choose materials. Section 553.844(5) limits the code upgrade on roof repairs: if your roof was built under the 2007 code or later and 25% or more is replaced, only the replaced part must meet the current code. Under section 627.7011, an insurer cannot refuse or non-renew a policy solely because a roof is under 15 years old.
My Safe Florida Home. Section 215.5586 sets up state grants for hurricane mitigation on eligible homes: windows, exterior and garage doors, skylights, and roof improvements including a new roof covering with secondary water resistance. The state pays $2 for every $1 from the homeowner, up to $10,000, and low-income applicants can receive up to $10,000 with no match. The home must be homesteaded, built before 2008 and insured for $700,000 or less, and the applicant must be low- or moderate-income. Funding depends on yearly appropriations; the program site said in November 2026 that its applicant portal was offline from November 10 for an upgrade. See the window and door page for details.
Licensing before you sign
Florida licenses general, building, residential, roofing, plumbing, air-conditioning and mechanical contractors under Part I of Chapter 489, and electrical contractors under Part II. Look up any of them on the DBPR license search. Section 489.128 says a contract signed by an unlicensed contractor cannot be enforced by that contractor, and gives them no lien rights.
Pest control companies are licensed by the Florida Department of Agriculture and Consumer Services under Chapter 482. Painting, fencing, landscaping and gutter cleaning have no state category in Chapter 489, so ask your county or city about local licenses. Our Florida contractor licensing guide explains each license and what it covers.
Getting a fair price
- Get at least two written bids for the same scope, with materials, permit fees and disposal listed.
- Compare a bid to the ranges here and on the trade pages. A price far below the range can mean missing scope.
- Ask your insurer what credits a roof, window or door upgrade would earn before you choose materials.
- Agree on a payment schedule tied to finished work. Our costs, contracts and payments section covers deposits, change orders and liens.
- When you are ready, request free quotes from licensed Florida contractors.
Sources
- Angi Tampa, FL cost guides (2026 data), one or more per trade, plus one Orlando chain-link fence guide; each article and its update date are listed on the trade pages linked above. https://www.angi.com/ (accessed November 2026)
- JLC Cost vs Value Report 2025, Miami and Jacksonville, Florida. https://www.jlconline.com/cost-vs-value/2025/south-atlantic/miami-fl/ and https://www.jlconline.com/cost-vs-value/2025/south-atlantic/jacksonville-fl/ (accessed November 2026)
- Homewyse cost calculators, January and May 2026 data, ZIPs 33130, 32202, 32801 and 33602. https://www.homewyse.com/ (accessed November 2026)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, Florida and national estimates. https://www.bls.gov/oes/tables.htm (accessed November 2026)
- Hillsborough County, Building Permit Fee Schedule, effective October 5, 2024. https://hcfl.gov/businesses/permits-and-records/permit-fees/building-permit-fees (accessed November 2026)
- City of Tampa, Trade Permit Fee Schedule, updated February 16, 2023. https://www.tampa.gov/sites/default/files/document/2026/trade_permit_fee_schedule_ada.pdf (accessed November 2026)
- Orange County, Fee Directory, Fiscal Year 2026โ2027. https://ocfl.net/Portals/0/resource%20library/Open%20Government/FeeDirectory.pdf (accessed November 2026)
- Miami-Dade County, Implementing Order 4-63, effective October 1, 2026. https://documents.miamidade.gov/ao-io/IO/IO-04-63.pdf (accessed November 2026)
- Florida Department of Revenue, Sales and Use Tax, and Tax Information Publication 03A01-03 (Rule 12A-1.051). https://floridarevenue.com/taxes/taxesfees/Pages/sales_tax.aspx (accessed November 2026)
- Florida Statutes, sections 215.5586, 482.071, 489.105, 489.128, 489.505, 553.844, 627.0629 and 627.7011 (2026). https://www.flsenate.gov/Laws/Statutes/2026/ (accessed November 2026)
- My Safe Florida Home, program site notice. https://mysafeflhome.com/ (accessed November 2026)
- This Old House, "Roof Replacement Cost in Florida," updated June 17, 2026. https://www.thisoldhouse.com/roofing/roof-replacement-cost-florida (accessed November 2026)
- Florida DBPR, Verify a License. https://www2.myfloridalicense.com/how-to-verify-a-license/ (accessed November 2026)
Frequently Asked Questions
Do I pay sales tax on home improvement work in Florida?
Usually it is built into the price. Florida's state sales tax is 6%, plus any county surtax. Under Department of Revenue Rule 12A-1.051(4), a contractor on a real property job pays the tax on the materials it buys, unless the contract is a retail sale plus installation. Ask your contractor how tax is handled on your bid.
Are contractor prices in Florida lower than national cost guides?
Labor is cheaper in many trades. Federal wage data for May 2025 shows Florida plumbers earning about 22% less than the national mean, carpenters 20% less and electricians 19% less. Material costs and wind-code requirements can offset that: Cost vs Value priced an asphalt roof at $39,729 in Miami against $31,871 nationally.
Where do I check a contractor's license in Florida?
Use the Department of Business and Professional Regulation search at myfloridalicense.com for roofers, plumbers, electricians, HVAC and general contractors. Pest control companies are licensed by the Florida Department of Agriculture and Consumer Services.