Florida gives you good tools for vetting a contractor, but you have to use them in the right order. This checklist follows a project from the first phone call to the final payment, with the statute behind each step.

Step 1: Define the job and who can do it

  • Write down what you want done, the rough size, and your timeline.
  • Figure out which license the job needs. A kitchen remodel with new circuits and plumbing needs a Division I contractor plus licensed electrical and plumbing subs (s. 489.113(3)). A re-roof needs a roofing contractor. Painting and flooring need no state license (s. 489.117(4)(a)). The licensing guide has the categories.
  • Call your county or city building department and ask what permits the job needs. Single-family work under $7,500 may be exempt on written request, with exceptions (s. 553.79(1)(g)).
  • Check typical prices in our cost guides, such as roofing or remodeling, so bids have context.

Step 2: Get more than one bid

Step 3: Verify the license

  1. Search the name or number in DBPR's online licensee search.
  2. Confirm the status is current and active. A contractor on an inactive or suspended license is treated as unlicensed (s. 489.127(1)).
  3. Check the category against your job, and for an R-prefix registered license, check that it covers your county or city (certified vs. registered).
  4. Make sure the company on the bid is the business qualified by that license.
  5. Repeat for key subcontractors (electrical, plumbing, HVAC, roofing). Electricians are licensed by a separate board; see electrical licensing.

Step 4: Check insurance

  • Ask for certificates of general liability insurance and workers' compensation. Board rule sets minimums of $300,000 liability and $50,000 property damage for general and building contractors, and $100,000 and $25,000 for residential and most trade contractors (rule 61G4-15.003, F.A.C.).
  • If a worker without coverage is hurt on your property, you may face a claim. The owner-builder disclosure warns that your homeowner's insurance may not cover those injuries (s. 489.103(7)(c)).

Step 5: Watch for red flags

  • No license number, or a number that doesn't match the name
  • A request that you pull an owner-builder permit for work they will do (owner-builder rules)
  • Pressure to skip the permit. Starting permitted work without one is illegal for the contractor (s. 489.127(1)(h))
  • A roofer offering gifts, cash or to cover your deductible for an inspection or claim (s. 489.147(2))
  • Door-to-door offers right after a storm from someone who can't show a Florida license (unlicensed contracting after a hurricane)
  • A request to sign over your insurance benefits. For policies issued on or after January 1, 2023, that assignment is void (s. 627.7152(13))

Step 6: Read the contract before you sign

On a residential job over $2,500, look for:

  • The Florida Homeowners' Construction Recovery Fund notice (s. 489.1425)
  • The construction lien law warning in 12-point bold capitals, signed and dated by you, for homes up to four units (s. 713.015)
  • The contractor's license number (s. 489.119(5)(b))
  • For a roof: the no-inducements notice, the insurance notice, and, during a declared emergency, the cancellation notice (s. 489.147)
  • Scope, materials, price, payment schedule, start and completion dates
  • A term requiring lien releases before each payment
  • Who pulls the permits

The full list is in Florida contract requirements.

Step 7: Keep the deposit in proportion

Florida sets no deposit limit. If you pay more than 10 percent up front, the contractor must apply for permits within 30 days and start within 90 days after the permits issue, unless you agree in writing to longer (s. 489.126(2)(a)). If it doesn't, send a written demand by certified mail, return receipt requested. Pay by check or card so you have a record.

Step 8: Record the Notice of Commencement

You, the owner, record the Notice of Commencement with the county clerk and post it at the site before the first inspection (s. 713.13). It's void if work doesn't start within 90 days and expires a year after recording unless it states a later date. Payments after it expires are improper payments. See the Notice of Commencement guide.

Step 9: Protect yourself from liens during the job

  • Keep every Notice to Owner you receive. Subs and suppliers must serve one within 45 days of starting, or they lose the right to enforce a lien (s. 713.06(2)(a)).
  • Before each payment, get partial lien releases from each of those parties.
  • DBPR suggests asking the contractor, by certified or registered mail, for a list of every sub and supplier on your job (lien law brochure, PDF).

More in Florida construction lien law.

Step 10: During the project

  • Keep a folder with the contract, change orders, receipts, permits, inspection results and every Notice to Owner.
  • Put change orders in writing with the price.
  • If work stops, note the date. A contractor holding more money than the value of work done may not stop work for 90 days, or the period in your contract (s. 489.126(3)).

Step 11: Finishing up

  • Every permit has a passed final inspection.
  • You have the contractor's final payment affidavit, sworn, listing any unpaid lienors (s. 713.06(3)(d)).
  • You have final releases from each party who served a Notice to Owner.
  • Warranties and manuals are in hand.
  • Then make the final payment.

If the affidavit lists unpaid bills, you may pay those parties directly after giving the contractor at least 10 days' written notice, and deduct what you paid (s. 713.06(3)(d)2.).

If something goes wrong

  • Liens: check the deadlines in lien law.
  • Abandonment or money taken without work: file with DBPR (complaint process), and look at the recovery fund, which pays up to $100,000 per Division I claim and $30,000 per Division II claim for contracts from July 1, 2024 (s. 489.143).
  • Unlicensed work: report it at 1-866-532-1440.
  • Not sure where to start: contact us.

Related pages

Sources

Frequently Asked Questions

What should I check before hiring a contractor in Florida?

Look up the license in DBPR's online licensee search or call 850-487-1395. Confirm it's active, the category covers your job (for example a residential, building or general contractor for a remodel, a roofing contractor for a roof), and for an R-prefix registered license, that it covers your county or city. Ask for certificates of liability insurance and workers' compensation.

Is a big deposit legal in Florida?

Florida doesn't cap deposits, but a contractor who takes more than 10 percent of the price up front on residential work must apply for permits within 30 days and start within 90 days after the permits issue, unless you agree otherwise in writing (s. 489.126(2)(a), F.S.).

What paperwork should I get before the final payment?

The contractor's sworn final payment affidavit listing any unpaid lienors who served a Notice to Owner (s. 713.06(3)(d), F.S.), and final lien releases from each of those parties. Also confirm the final inspection passed on every permit.